Home > HARDWARE > WINDOW & DOOR HARDWARE > PATIO DOOR HARDWARE
Choose a sub category:
LATCHES / HANDLES PATIO DOOR REPAIR PARTS
Sort By:
1
Prime-Line GD 12150 Cable Ferrule and Stop, Aluminum Prime-Line GD 12152 Cable Ferrule and Stop, Aluminum Prime-Line GD 12151 Cable Ferrule and Stop, Aluminum
Our Price: $2.59
more info
Our Price: $2.79
more info
Our Price: $2.79
more info
Prime Line GD 12150 Extruded Cable Ferrule and Stop Prime Line GD 12152 Extruded Cable Ferrule and Stop Prime Line GD 12151 Extruded Cable Ferrule and Stop
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops.
Prime-Line GD 12153 Cable Ferrule and Stop, Aluminum Prime-Line GD 12154 Cable Ferrule and Stop, Aluminum National Hardware N235-309 Bar Holder, Steel, Zinc
Our Price: $3.79
more info
Our Price: $5.39
more info
Our Price: $6.99
more info
Prime Line GD 12153 Extruded Cable Ferrule and Stop Prime Line GD 12154 Extruded Cable Ferrule and Stop Stanley 235309 Open Bar Holder
Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Designed for use with overhead garage door hardware. Ferrules used to clamp cable loops into fixed position while stops finish off cable ends or act as stopping points at any location on cable. Card contains 2 ferrules and 2 stops. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
National Hardware N235-291 Bar Holder, Steel, Zinc National Hardware N351-503 Bar Holder, Steel Prime-Line GD 52109 Pulley with Strap and Axle Bolt, 3 in Dia, 5/16 in Dia Bore, Galvanized Steel
Our Price: $6.99
more info
Our Price: $6.99
more info
Our Price: $7.59
more info
Stanley 235291 Closed Bar Holder Stanley 351503 Open Bar Holder Prime Line GD 52109 Garage Door Pulley
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside.
Prime-Line GD 52105 Garage Door Hinge, Steel, Galvanized, Non-Removable Pin, Surface Mounting Prime-Line GD 52130 Door Pull, Steel, Galvanized Prime-Line GD 52111 Door Roller, 1-13/16 in Dia Roller, 7/16 in W Roller, Galvanized Steel, Silver, 1-Roller
Our Price: $7.99
more info
Our Price: $7.99
more info
Our Price: $7.99
more info
Prime Line GD 52105 Standard Garage Door Hinge 3 in W Door Leaf Prime Line GD 52130 Door Lift Handle Prime Line GD52111 Convex Edge Door Roller
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts. Replaces most handles currently in use. Galvanized steel construction. Use vertically or horizontally. Includes two 1/4 in - 20 x 1-7/8 in pancake head carriage bolts with nuts. Used on side by side hinge placements for added strength. Factory lubricated, steel inner race with 10 ball bearings. Roller 1-7/8 in OD.
Prime-Line GD 52104 Garage Door Hinge, Steel, Galvanized, Non-Removable Pin, Surface Mounting National Hardware N351-502 Bar Holder, Steel National Hardware N235-516 Bar Holder, 6-1/2 in L, Steel, Galvanized
Our Price: $7.99
more info
Our Price: $7.99
more info
Our Price: $7.99
more info
Prime Line GD 52104 Standard Garage Door Hinge 3 in W Door Leaf Stanley 351502 Closed Bar Holder BAR HOLDER GALV 6-1/2
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts. Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel. National Hardware Bar Holder, Steel, Galvanized, 6-1/2 in L
Prime-Line GD 52106 Garage Door Hinge, Steel, Galvanized, Non-Removable Pin, Surface Mounting Prime-Line B 639 Roller Assembly, 1 in Dia Roller, 1/4 in W Roller, Steel, Gray, 2-Roller National Hardware N280-875 Bolt and Nut, Steel, Zinc
Our Price: $8.69
more info
Our Price: $8.69
more info
Our Price: $10.99
more info
Prime Line GD 52106 Standard Garage Door Hinge 3 in W Door Leaf Prime Line B 639 Concave Edge Spring Tension Roller Assembly BOLT/NT RBD NK ZN 1/4IN-20X1/2
Used by most garage door manufacturers. Roller tube accepts a standard 7/16 in OD stem roller. Made of 14 ga galvanized steel, 3 in OAW. Includes four 1/4 in-20 x 1-7/8 in pancake head carriage bolts with nuts. Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw. National Hardware Bolt and Nut, Ribbed Neck, Dimensions: 1/4 in Dia x 1/2 in L, Steel, Zinc, Suitable for: Fiberglass Garage Doors
Prime-Line D 1603 Roller Assembly, 1-1/4 in Dia Roller, Steel, 1-Roller Prime-Line GD 52183 Aircraft Cable, 1/8 in Dia, 8 ft 6 in L, Carbon Steel, Galvanized Prime-Line GD 52197 Lifting Bracket, Steel, Galvanized
Our Price: $10.99
more info
Our Price: $11.99
more info
Our Price: $12.99
more info
Prime Line D1603 Concave Edge Sliding Door Roller Assembly Prime Line GD 52183 Aircraft Cable Prime Line GD 52197 Bottom Mount Lift Bracket
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16 in L x 1-1/8 in H x 11/16 to 9/16 in D die-cast housing assembly with 15/16 in flare width. Galvanized carbon steel aircraft cable used on 7 ft H torsion spring doors. Used on both wood and metal doors. Heavy-duty 13 ga galvanized steel construction and steel cable pin. Accepts a standard 7/16 in OD stem roller. Includes left and right hand brackets.
Prime-Line GD 52140 Door Roller, 1-7/8 in Dia Roller, 1/2 in W Roller, Steel, White Prime-Line GD 52139 Rim Cylinder Lock, Zinc, Brass, C Keyway Prime-Line GD 52108 Pulley with Strap and Axle Bolt, 4 in Dia, 3/16 in Dia Bore, Galvanized Steel
Our Price: $12.99
more info
Our Price: $14.99
more info
Our Price: $14.99
more info
Prime Line GD52140 Convex Edge Standard Door Roller Prime Line GD 52139 Rim Cylinder Lock Prime Line GD 52108 Garage Door Pulley
Factory lubricated, steel inner race. Fits 2 in standard J-track. Roller 1-7/8 in OD. Heavy-duty zinc die-cast housing with brass face and 5-pin tumbler lock. Used to key lock a variety of interior latching mechanisms. Can be purchased keyed-alike via special order to be used separately or with GD-52119 center mount deadbolt lock. Heavy-duty galvanized steel pulley with galvanized steel strap. Case hardened steel race with steel ball bearings. Factory lubricated and can be used at stationary or spring pulley positions. This pulley is designed to support steel cables up to 3/16 in Dia.
Prime-Line GD 52138 Side Lock, Galvanized Steel Prime-Line E 2000 Cylinder Lock, Alike Key, Brass, Chrome, 1-1/4 in Thick Door Prime-Line GD 52102 Safety Cable, Carbon Steel, Galvanized
Our Price: $14.99
more info
Our Price: $14.99
more info
Our Price: $15.99
more info
Prime Line GD 52138 Door Slide Lock Prime Line E-2000 Cylinder Lock Prime Line GD 52102 Aircraft Safety Cable Set with Cable Clamps
Heavy-duty galvanized steel, spring-loaded slide-bolt lock with latch bolt release lever for overhead garage doors. Used with GD-52147 outside lock and latch assembly. Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser, Kwikset & Weslock. Galvanized carbon steel aircraft cable installs through extension springs to prevent injury in case of breakage. Required on California installations. Use 4 cables for dual spring doors.
Prime-Line GD 52118 Inside Deadlock, Galvanized Steel Prime-Line GD 52189 Door Pulley, 3 in Dia, Steel, Galvanized Prime-Line GD 52169 T-Locking Handle, 5/16 in L Shaft, Zinc, Chrome
Our Price: $15.99
more info
Our Price: $18.99
more info
Our Price: $21.99
more info
Prime Line GD 52118 Inside Deadlock PULLEY W/2 STRAP-AXLE BLTS 3IN Prime Line GD52169 Door T Handle Lock
Works only from inside for extra protection as a night or vacation security lock. Fits most garage doors. Engages slot in vertical track. 7/8 in W x 1/8 in thick steel slide bolt with heavy-duty galvanized steel housing. Includes lock assembly and four 1/4 in-20 x 1-7/8 in pancake-head carriage bolts with nuts. Heavy-duty galvanized steel pulley with galvanized steel strap case hardened steel race with steel ball bearings factory lubricated can be used at stationary or spring pulley positions. The width of the groove measures 5/16 in from inside wall to inside. Zinc die-cast construction, keyed lock, 5/16 in square shaft, 4-5/8 in long, 1-1/2 in hole centers, replaces many garage door, camper and R.V locking handles. Screws attach to lock from the inside of door. Contains 1 locking handle, 2 keys.
Prime-Line GD 52117 Top Roller Fixture, Adjustable, Galvanized Steel, Silver Prime-Line GD 52122 T-Locking Handle, 5/16 in L Shaft, Zinc, Chrome Prime-Line GD 12191 Extension Spring, 1-19/64 in OD, 25 in OAL, Carbon Steel, Galvanized, Loop End, 110 lb
Our Price: $21.99
more info
Our Price: $24.99
more info
Our Price: $27.99
more info
Prime Line GD52117 Adjustable Top Mount Roller Fixture Prime Line GD 52122 Door T Handle Lock Prime Line GD 12191 Extension Spring 25 in L
Heavy-duty galvanized steel fixture with adjustable roller plate, accepts a standard 7/16 in Dia stem roller, used on most wood doors. 5/16 in square shaft, 3 in L, replaces most garage door, camper and RV locking handles. Zinc die-cast construction. 1-1/2 in hole centers. Includes locking handle and 2 chrome-plated solid brass keys. Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable.
Prime-Line GD 12192 Extension Spring, 1-19/64 in OD, 25 in OAL, Carbon Steel, Galvanized, Loop End, 120 lb National Hardware 1264 Series N161-760 Jamb Latch, Steel, Zinc National Hardware 1265 Series N160-754 Jamb Latch, Steel, Zinc
Our Price: $27.99
more info
Our Price: $29.99
more info
Our Price: $29.99
more info
Prime Line GD 12192 Extension Spring 25 in L Stanley 161760 Cam Latch Stanley 160754 Cam Latch
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable. Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed. Boxed.
Prime-Line GD 12193 Extension Spring, 1-19/64 in OD, 25 in OAL, Carbon Steel, Galvanized, Loop End, 130 lb Prime-Line GD 12194 Extension Spring, 1-19/64 in OD, 25 in OAL, Carbon Steel, Galvanized, Loop End, 140 lb Prime-Line GD 52119 Deadbolt Lock, Tumbler Keyway
Our Price: $29.99
more info
Our Price: $31.99
more info
Our Price: $32.99
more info
Prime Line GD 12193 Extension Spring 25 in L Prime Line GD 12194 Extension Spring 25 in L Prime Line GD 52119 Deadbolt
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable. Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable. Painted die-cast inside lock with heavy-duty steel spring bolt, key cylinder has aluminum face and 5-pin tumbler lock with cylinder ring, will replace most locking mechanisms of this type.
Prime-Line C 1204 Door Pull Set, 2-1/8 in W, 1-13/16 in D, Wood, Painted National Hardware 1254 Series N185-447 Barn Door Latch, Steel, Zinc Chamberlain 7708CB-P Chain Drive Rail Extension Kit, For: Garage Doors
Our Price: $37.99
more info
Our Price: $39.99
more info
Our Price: $49.99
more info
Prime Line C-1204 Mortise Lock Handle Set Stanley 185447 Center Latch Chamberlain 7708CB Chain Drive Rail Extension Kit
Standard reversible surface-mount for left or right-handed mortise-locking doors. Die-cast inside pull has wood handle, die-cast thumb turn and steel latch activator. Outside pull is die-cast. Designed for bi-parting wood sliding doors at least 1-1/2 in thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. 15 in long hook. Boxed. Includes 8 ft chain/cable assembly, rope, master link kit and 2 rail clips.
Prime-Line GD 12195 Extension Spring, 1-19/64 in OD, 25 in OAL, Carbon Steel, Galvanized, Loop End, 150 lb Chamberlain 8808CB-P Belt Drive Rail Extension Kit, For: Garage Doors
Our Price: $49.99
more info
Our Price: $67.99
more info
Prime Line GD 12195 Extension Spring 25 in L Chamberlain 8808CB Belt Drive Rail Extension Kit
Heavy-duty (10, 000 cycles) extension springs have double loop ends for extra durability. 5 sizes will replace most all spring configurations on residential doors that are no higher than 7 ft. 1/8 in galvanized carbon steel aircraft cable. Includes 8 ft belt assembly, rope, master link kit, spring nut assembly and 2 rail clips.
   
 
1