VENTILATION PRODUCTS

Products

Nav Menu 2

Nav Menu 3

Home > HARDWARE > CONSTRUCTION HARDWARE > VENTILATION PRODUCTS

Choose a sub category:

ROOF VENTILATORS	POWER ROOF VENTILATORS
RIDGE VENTS	GABLE VENTS
POWER GABLE VENTS	EAVE VENTS
SIDING VENTS	UTILILTY VENTS / EXHAUST VENTS
FOUNDATION VENTS

Sort By:

1 2 3 ... 6

Fasade 92801 Backsplash Inside Corner Trim, 18 in L, PVC, Matte, White

Fasade 923-01 J-Trim, 18 in L, PVC, Matte, White

Fasade 92827 Backsplash Inside Corner Trim, 18 in L, Thermoplastic, Smoked Pewter

Our Price: $2.59

Our Price: $2.59

Fasade Backsplash Inside Corner Trim, PVC, White, Matte, 18 in L, Suitable for: Backsplash Panels Fasade J-Trim, PVC, White, Matte, 18 in L Fasade Backsplash Inside Corner Trim, Thermoplastic, Smoked Pewter, 18 in L

Fasade 92327 J-Trim Backsplash, 18 in L, Thermoplastic, Smoked Pewter

Canplas 641604 Soffit Vent, 15.94 in L, 3.98 in W, 18.6 sq-in Net Free Ventilating Area, Plastic, White

WallTuf 9020803 Inside Corner Moulding, 8 ft L, Vinyl, White

Our Price: $2.59

Our Price: $4.29

Our Price: $4.99

Fasade J-Trim Backsplash, Thermoplastic, Smoked Pewter, 18 in L Installs easily under eaves. Small louvers guard against weather and insect entry. Injection molded UV-resistant polypropylene for impact. White soffit vent. WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L

Toolpro 5010 Eye Lag Screw, Carbon Steel, Zinc

WallTuf 9020805 End Cap Moulding, 8 ft L, Vinyl, White

WallTuf 9020801 Divider Moulding, 8 ft L Actual, Vinyl, White

Our Price: $4.99

Our Price: $5.99

Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment. WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length

Canplas 641608 Soffit Vent, 15.88 in L, 7.95 in W, 45-1/2 sq-in Net Free Ventilating Area, Plastic, White

Maurice Franklin PLW-100 Series PLW100 1 Screen Louver, 1.2 in W, Polypropylene, White

Sun N Rain 94361 Closure Strip, 2 ft L, Plastic

Our Price: $5.99

Our Price: $6.99

Installs easily under eaves. Small louvers guard against weather and insect entry. Injection molded UV-resistant polypropylene for impact. White soffit vent. One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.

Suntuf 92770 Closure Strip, 2 ft L, 1-3/16 in W, Fiberglass

Palruf 92771 Closure Strip, 2 ft L, 1-1/4 in W, Asphalt Saturated Glass

Suntuf 92772 Closure Strip, Plastic, Brown

Our Price: $6.99

Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Use under Palram's corrugated panels to close off vertical edges for a finished look.

Maurice Franklin RL-100 1 Mini Louver with Insect Screen, 1.219 in W, Round, Aluminum, Mill

ALEXANDRIA Moulding 0Q1X4-70048C Common Board, 4 ft L Nominal, 4 in W Nominal, 1 in Thick Nominal

Woodtite 92523 Screw, 2 in L, Coarse Thread, Hex Drive, Self-Drilling Point, Galvanized Steel

Our Price: $6.99

Our Price: $7.59

We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.

ALEXANDRIA Moulding 0Q1X4-20048C Sanded Common Board, 4 ft L Nominal, 4 in W Nominal, 1 in Thick Nominal

Tuftex 2212D Round Closure Strip, 6 ft L, 1 in W, Wood, Brown, Horizontal

Maurice Franklin RLW-100 1 Mini Louver with Insect Screen, 1.219 in W, Round, Aluminum, White

Our Price: $7.99

Our Price: $8.69

Sanded on four sides. Tuftex Round Closure Strip, 6 ft L, 1 in W, Wood, Brown, Horizontal Mounting, Suitable for: SeaCoaster Panels We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.

Maurice Franklin RLB-100 Series 1 RLB-100 Louver, 1.219 in L, 1.219 in W, Round, Aluminum, Brown

Suntuf 92520 Closure Strip, 3 ft L, 7/8 in W, Fabric

Maurice Franklin RL-100 1.5 Screen Louver, 1.813 W, Aluminum, Mill

Our Price: $8.69

Our Price: $9.99

A minimum of 0.020 ga aluminum for our round aluminum louvers, screens and plugs most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.

Maurice Franklin RL-100 2.5 Screen Louver, 2.907 W, Aluminum, Mill

Maurice Franklin RLB-100 2.5 Screen Louver, 2.907 W, Aluminum, Brown

Tuftex 22143 Round Closure Strip, 3 ft L, Foam, Horizontal

Our Price: $9.99

We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. Tuftex Round Closure Strip, 3 ft L, Foam, Horizontal Mounting, Suitable for: Tuftex SeaCoaster PVC Panel

Maurice Franklin RLW-100 2.5 Screen Louver, 2.907 W, Aluminum, White

Maurice Franklin PLW-100 Series PLW100 2 Screen Louver, 2-1/4 W, Polypropylene, White

Maurice Franklin PLW-100 Series PLW100 3 Screen Louver, Polypropylene, White

Our Price: $9.99

Our Price: $10.99

We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.

Maurice Franklin PLB-100 3 Screen Louver, Polypropylene, Brown

Toolpro TP05044 Ceiling Grid Clamp, Plastic

Duraflo 620808 Gable Vent, 10.12 in L, 10.855 in W, Polypropylene, White

Our Price: $10.99

One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finish. Provides long-term durability and function to home. Injection molded UV-resistant polypropylene. White gable vents.

ALEXANDRIA Moulding PYR02-PY012C Round Plywood

ALEXANDRIA Moulding 102X4-WS096C1 Stud, Wood

ALEXANDRIA Moulding 0Q1X4-70096C Common Board, 8 ft L Nominal, 4 in W Nominal, 1 in Thick Nominal

Our Price: $10.99

ALEXANDRIA Moulding Round Plywood, 3/4 in Actual Thickness, 11-3/4 in Actual Width ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 8 ft Length

Toolpro TP05032 Eye Lag Driver

Metaltite 92525 Self-Drilling Screw, Carbon Steel, Galvanized

Maurice Franklin RL-100 3 4PK Mini Louver, Round, 2.98 in Rough Opening, Aluminum

Our Price: $11.99

This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver. Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer. We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.

Witten Vent 510BL Foundation Vent, 15-1/4 in W, Polypropylene, Black Oxide

Witten Vent 510WH Foundation Vent, 15-1/4 in W, Polypropylene, White

Witten Vent 510BR Foundation Vent, 15-1/4 in W, Polypropylene, Brown

Our Price: $11.99

Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening. Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening. Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening.

COMMON BOARD 1X8INX4FT PINE

Maurice Franklin RL-100 2 Screen Louver, 2.391 W, Aluminum, Mill

Maurice Franklin RLW-100 1.5 Screen Louver, 1.813 W, Aluminum, White

Our Price: $11.99

Trim Corner Inside Bronze 18in - Case of 5

Trim Corner Inside Copper 18in - Case of 5

J-TRIM EDGE 18IN BERMUDA BRZ - Case of 5

Our Price: $12.95

Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife. Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife. Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.

Maurice Franklin RLB-100 2 Screen Louver, 2.391 W, Aluminum, Brown

Maurice Franklin RLB-100 3 Screen Louver, 3-17/32 W, Aluminum, Brown

Maurice Franklin RLW-100 2 Mini Louver with Insect Screen, 2.391 in W, Round, Aluminum, White

Our Price: $12.99

We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.

Maurice Franklin RLW-100 3 Mini Louver with Insect Screen, 3.53 in W, Round, Aluminum, White

Maurice Franklin RL-100 Series 6 RL-100 Louver, 6.688 in L, 6.688 in W, Round, Aluminum, Mill

Maurice Franklin PLW-100 Series PLW100 4 Screen Louver, 4.813 in W, Polypropylene, White

Our Price: $12.99

Our Price: $13.99

We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. A minimum of 0.020 ga aluminum for our round aluminum louvers, screens and plugs most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.

Master Flow IR612BR Roof Louver, 17-1/2 in L, 18-1/2 in W, Resin, Brown, Roof Installation

ALEXANDRIA Moulding 0Q1X6-20048C Sanded Common Board, 4 ft L Nominal, 6 in W Nominal, 1 in Thick Nominal

Duraflo 620812 Gable Vent, 13.848 in L, 10.862 in W, Polypropylene, White

Our Price: $13.99

Just 2 in H for better appearance. Injection-molded, high-impact resin construction for long life. Colors complement most roofs. Pre-drilled nail holes make installation easier. 11-3/4 in x 9-3/4 in opening, 18-1/2 in x 17-1/2 in flashing, 4-1/4 in H, 37 sq-in of net-free ventilating area. Sanded on four sides. Provides long-term durability and function to home. Injection molded UV-resistant polypropylene for impact. White gable vents.

ALEXANDRIA Moulding PY001-PY048C Rectangular Plywood

Maurice Franklin RLW-100 Series 6 RLW-100 Louver, 6.688 in L, 6.688 in W, Round, Aluminum, White

Maurice Franklin RLB-100 Series 6 RLB-100 Louver, 6.688 in L, 6.688 in W, Round, Aluminum, Brown

Our Price: $13.99

ALEXANDRIA Moulding Rectangular Plywood, 1/4 in Actual Thickness, 2 in Actual Width, 4 ft Actual Length, B-C Grade A minimum of 0.020 ga aluminum for our round aluminum louvers, screens and plugs most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs. A minimum of 0.020 ga aluminum for our round aluminum louvers, screens and plugs most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.


	1 2 3 ... 6

The Hardware Store of Sparta

Products

Nav Menu 2

Nav Menu 3

Company Information

My Account

Customer Service