BATTERIES

Products

Nav Menu 2

Nav Menu 3

Home > ELECTRICAL > SPECIALTY ELECTRICAL > BATTERIES

Choose a sub category:

AAA BATTERY/BATTERIES	AA BATTERY/BATTERIES
C BATTERY/BATTERIES	D BATTERY/BATTERIES
9 VOLT BATTERY/BATTERIES	6 VOLT BATTERY/BATTERIES
WATCH BATTERY/BATTERIES	SPECIALTY BATTERY/BATTERIES
RECHARGEABLE BATTERY/BATTERIES	BATTERY CHARGERS
COIN / BUTTON CELL BATTERIES

Sort By:

1 2 3 ... 10

Halex 61905B Conduit Locknut, 1/2 in, Steel, Zinc

Halex 75205B Conduit Bushing, 1/2 in, PVC

Halex 61907B Conduit Locknut, 3/4 in, Steel, Zinc

Our Price: $0.39

Our Price: $0.39

Our Price: $0.49

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.

Halex 75207B Conduit Bushing, 3/4 in, PVC

Carlon E940D-CTN Conduit Coupling, 1/2 in, PVC

Carlon E940E-CTN/CAR Conduit Coupling, 3/4 in Socket, PVC

Our Price: $0.49

Our Price: $0.59

Carlon E942DR-CTN Conduit Adapter, 1/2 in Female, 1-7/64 in Dia, 1-9/16 in L, PVC, Gray

Carlon E943D-CTN Terminal Adapter, 1/2 in MPT x Socket, 1.04 in Dia, 1.31 in L, PVC, Gray

Carlon E943E-CTN Terminal Adapter, 3/4 in MPT x Socket, 1.29 in Dia, 1.47 in L, PVC, Gray

Our Price: $0.59

Our Price: $0.69

Carlon Conduit Adapter, 1/2 in Trade, Female Connection, PVC, Gray, 1-9/16 in Length, 1-7/64 in Diameter, Suitable for: SCH 40 and 80 Conduits, Includes: (30) Female Adapters Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance. Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Halex 12101B Set Screw Connector, 1/2 in, Zinc, 50/PK

Halex 61910B Conduit Locknut, 1 in, Steel, Zinc

Carlon E942ER-CTN Conduit Adapter, 3/4 in FPT x Socket, 1-5/16 in Dia, 1-5/8 in L, PVC, Gray

Our Price: $0.79

Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.

Halex 75210B Conduit Bushing, 1 in, PVC

Carlon E996DR-CTN Conduit Adapter, 0.84 in Dia, 27/32 in L, PVC

Carlon E940FR-CTN Conduit Coupling, 1 in Socket, 1.21 in ID x 1.625 in OD Dia, 2 in L, PVC, Gray

Our Price: $0.89

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. Carlon Conduit Adapter, PVC, 27/32 in L, 0.84 in Dia Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.

Halex 60797B Knockout Seal, 3/4 in, Steel, Zinc-Plated

Halex 61912B Conduit Locknut, 1-1/4 in, Steel, Zinc

Halex 75212B Conduit Bushing, 1-1/4 in, PVC

Our Price: $0.89

Our Price: $0.99

Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved.

Carlon E996ER-CTN Conduit Adapter, 1.05 in Dia, 29/32 in L, PVC

Carlon E942FR-CTN Conduit Adapter, 1 in Female, 1-5/8 in Dia, 1-15/16 in L, PVC, Gray

Halex 61915B Conduit Locknut, 1-1/2 in, Steel, Zinc

Our Price: $0.99

Our Price: $1.19

Carlon Conduit Adapter, PVC, 29/32 in L, 1.05 in Dia Carlon Conduit Adapter, 1 in Trade, Female Connection, PVC, Gray, 1-15/16 in Length, 1-5/8 in Diameter, Suitable for: SCH 40 and 80 Conduits Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.

Halex 75215B Conduit Bushing, 1-1/2 in, PVC

Carlon E943FR-CTN Terminal Adapter, 1 in MPT x Socket, 1.58 in Dia, 1.9 in L, PVC, Gray

Halex 90440 Conduit Connector, 3/8 in Screw, Zinc

Our Price: $1.19

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance. Zinc die-cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs.

Halex 90451 Conduit Coupling, 1/2 in Screw, Zinc-Plated

Halex 12301B Set Screw Connector, 3/4 in, Zinc, 25/PK

Halex 02101B Connector, 1/2 in Compression, Zinc

Our Price: $1.19

Our Price: $1.39

Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved. Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.

Halex 61920B Conduit Locknut, 2 in, Steel, Zinc, 50/PK

Halex 97525 Conduit Bushing, 1-1/2 in, PVC

Carlon E940GR-CTN Conduit Coupling, 1-1/4 in Socket, 1.535 in ID x 1.98 in OD Dia, 2-1/8 in L, PVC, Gray

Our Price: $1.39

Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. Safe, non-conductive. SCH 40 non-metallic socket type coupling for joining SCH 40 non-metallic conduit. Will not rust or corrode. RoHS compliance, UL listed.

Carlon E942GR-CTN Conduit Adapter, 1-1/4 in FPT x Socket, 1-63/64 in Dia, 2 in L, PVC

Halex 96193 Conduit Locknut, 1 in, Steel, Zinc

Carlon UA9ADB-CTN Elbow, 1/2 in Trade Size, 90 deg Angle, SCH 80 Schedule Rating, PVC, Bell End, Gray

Our Price: $1.39

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Halex 26190 Conduit Locknut, 1/2 in, Steel, Zinc

CANTEX 5133823 Standard Radius Elbow, 1/2 in Trade Size, 90 deg Angle, SCH 40 Schedule Rating, PVC, 4 in L Radius, Gray

Carlon E940HR-CTN Standard Coupling, 1-1/2 in, 1.755 in ID x 2.2344 in OD Dia, 2-3/8 in L, PVC, Gray

Our Price: $1.39

Our Price: $1.49

Halex Conduit Locknut, 1/2 in Trade, Steel, Zinc, Suitable for: IMC Conduit or Various Threaded Fittings, Use with Rigid CANTEX 5133823 is a 1/2 in 90 deg plain end SCH 40 standard radius elbow used to change the direction of a conduit run by 90 deg. Carlon Standard Coupling, 1-1/2 in Trade, PVC, Gray, 2-3/8 in Length, 1.755 in ID x 2.2344 in OD Diameter, Suitable for: SCH 40 and 80 Conduits

Halex 96073 Knockout Seal, 1 in, Steel

Halex 96194 Conduit Locknut, 1-1/4 in, Steel, Zinc

Halex 04203B Squeeze Connector, 3/8 in, Zinc

Our Price: $1.49

Our Price: $1.69

Halex Knockout Seal, 1 in Trade, Steel, 2 in Length Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs. UL listed.

Halex 75220B Conduit Bushing, 2 in, PVC

Carlon UA7ADR-CAR Elbow, 1/2 in Trade Size, 45 deg Angle, SCH 80 Schedule Rating, PVC, Plain End, Gray

Carlon UA7AER-CAR Elbow, 3/4 in Trade Size, 45 deg Angle, SCH 80 Schedule Rating, PVC, Plain End, Gray

Our Price: $1.69

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297. For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Carlon UA9AER-CTN Elbow, 3/4 in Trade Size, 90 deg Angle, SCH 80 Schedule Rating, PVC, Plain End, Gray

Carlon E943GR-CTN Terminal Adapter, 1-1/4 in MPT x Socket, 1.97 in Dia, 1.98 in L, PVC, Gray

Carlon E943HR-CTN Terminal Adapter, 1-1/2 in MPT x Socket, 2.18 in Dia, 2.1 in L, PVC, Gray

Our Price: $1.69

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance. Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

Halex 90481 Flex Connector, 1/2 in Screw, Zinc

Halex 91321 Reducing Bushing, 3/4 x 1/2 in Thread, Steel

Energizer 1250SW-2 Battery, 1.5 V Battery, 800 mAh, D Battery, Zinc, Manganese Dioxide

Our Price: $1.69

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL listed. Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Eveready Super heavy-duty is the affordable carbon zinc solution that provides power for basic power needs. Eveready super heavy-duty brand offers a complete line of AA, AAA, C, D, 9 V and 6 V lantern batteries and are an economical choice for clocks, flashlights, radios and other devices that are low drain.

Carlon UA7ADB-CTN Elbow, 1/2 in Trade Size, 45 deg Angle, SCH 80 Schedule Rating, PVC, Bell End, Gray

Halex 27520 Conduit Bushing, 1/2 in, 0.537 in Dia, 2.64 in L, PVC

Carlon UA9AEB-CTN Elbow, 3/4 in Trade Size, 90 deg Angle, SCH 80 Schedule Rating, PVC, Bell End, Gray

Our Price: $1.69

Our Price: $1.79

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297. Halex Conduit Bushing, Trade Size: 1/2 in, PVC, 2.64 in L, 0.537 in Dia For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Carlon E942HR Conduit Adapter, 1-1/2 in FPT x Socket, 2-5/32 in Dia, 2-7/32 in L, PVC, Gray

Carlon E950ED-CTN Conduit Bushing, 3/4 x 1/2 in Bell x Spigot, 1-11/32 in Dia, 1-5/32 in L, PVC, Gray

Carlon UA7AEB-CTN Elbow, 3/4 in Trade Size, 45 deg Angle, SCH 80 Schedule Rating, PVC, Bell End, Gray

Our Price: $1.79

Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

Halex 27528 Conduit Bushing, 1 in, PVC

Halex 91641 Box Spacer, 1/2 in, Zinc

Halex 96195 Conduit Locknut, 1-1/2 in, Steel, Zinc

Our Price: $1.79

Our Price: $1.99

Halex Conduit Bushing, 1 in Trade, PVC, 105 deg C Operating Die cast of high strength corrosion-resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA listed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.

Halex 91530 EMT Combination Conduit Coupling, 1/2 in, Zinc-Plated

Halex 02301B Connector, 3/4 in Compression, Zinc, 25/PK

Halex 04205B Squeeze Connector, 1/2 in, Zinc

Our Price: $1.99

Zinc die-cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. UL approved. Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved. Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs. UL listed.


	1 2 3 ... 10

The Hardware Store of Sparta

Products

Nav Menu 2

Nav Menu 3

Company Information

My Account

Customer Service