PUMPS (WELL)

Products

Nav Menu 2

Nav Menu 3

Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL)

Choose a sub category:

WELL & JET PUMPS	PUMP TANKS
WELL & JET PUMP ACCESSORIES	PITCHER PUMPS / ACCESSORIES
PRESSURE SWITCHES	PRESSURE GAUGES
PRESSURE REGULATING VALVES	AIR VOLUME CONTROLS
WELL PUMP REPAIR PARTS	WELL PUMPS - SHALLOW
WELL PUMPS - DEEP	WELL PUMPS - CONVERTIBLE
WELL PUMPS - SUBMERSIBLE	CHECK VALVES - IP THREADED
CHECK VALVES - PUSH FIT	CHECK VALVES - PVC IP THREADED
CHECK VALVES - PVC SOLVENT	FOOT VALVES

Sort By:

1 2 3

Simmons 1358 Cable Guard

Anderson Metals 756110-0604 Hex Pipe Bushing, 3/8-18 x 1/4-18 in, MNPT x FNPT, 1000 psi Pressure

COUPLING BRASS BARSTOCK 1/4

Our Price: $1.39

Our Price: $4.29

Our Price: $4.59

Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4 to 6 in casing. Easy to use, snap-in wire guide. With split circle wire hole. One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Anderson Metals 756116-02 Street Pipe Elbow, 1/8 in, FIP x MIP, 90 deg Angle, Brass, Rough, 1000 psi Pressure

Anderson Metals 756100-02 Pipe Elbow, 1/8 in, FIP, 90 deg Angle, Brass, 1000 psi Pressure

Simmons 1371 Splicing Kit, For: #3 and 10 ga, 12 ga, 14 ga Submersible Cable

Our Price: $4.99

Our Price: $5.39

One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Metals Pipe Elbow, Nominal Size: 1/8 in, FIP Connection, Angle: 90 deg, 1000 psi, Operating Temperature: 250 deg F, Brass, Suitable for: Brass and Steel Pipes Wire sizes 3-wire 10-12-14. Sleeve size 3/8 in x 3 in.

Anderson Metals 756110-0602 Hex Pipe Bushing, 3/8-18 x 1/8-27 in, MNPT x FNPT, 1000 psi Pressure

Simmons 1306 Pressure Gauge, 1/4 in Connection, MPT, 2 in Dial, Steel Gauge Case, 0 to 200 lb, Lower Connection

Simmons 1305 Pressure Gauge, 1/4 in Connection, MPT, 2 in Dial, Steel Gauge Case, 0 to 100 lb, Lower Connection

Our Price: $5.39

Anderson Metals 756110-0802 Hex Pipe Bushing, 1/2-14 x 1/8-27 in, MNPT x FNPT, 1000 psi Pressure

Anderson Metals 756110-0804 Hex Pipe Bushing, 1/2-14 x 1/4-18 in, MNPT x FNPT, 1000 psi Pressure

Anderson Metals 738110-0804 Reducing Pipe Bushing, 1/2 x 1/4 in, Male x Female, 200 psi Pressure

Our Price: $5.99

Our Price: $6.49

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Anderson Metals 738119-0604 Reducing Pipe Coupling, 3/8 x 1/4 in, FIPT, Brass, 200 psi Pressure

Simmons 1235 Splicing Kit, Plastic, For: #3 and 10 ga, 12 ga, 14 ga Submersible Cable

Anderson Metals 756116-04 Street Pipe Elbow, 1/4 in, FIP x MIP, 90 deg Angle, Brass, Rough, 1000 psi Pressure

Our Price: $6.99

Anderson Metals Reducing Pipe Coupling, Nominal Size: 3/8 x 1/4 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable. One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Anderson Metals 738110-0806 Reducing Pipe Bushing, 1/2 x 3/8 in, Male x Female, 200 psi Pressure

Anderson Metals 738107-06 Pipe Elbow, 3/8 in, FIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 756103-06 Pipe Coupling, 3/8 in, FIPT, Brass

Our Price: $6.99

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Metals Pipe Elbow, Nominal Size: 3/8 in, FIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Pipe Coupling, Nominal Size: 3/8 in, FIPT Connection, Brass

Anderson Metals 738103-04 Pipe Coupling, 1/4 in, FIPT, Brass

Anderson Metals 738100-06 Pipe Elbow, 3/8 in, FIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738103-06 Pipe Coupling, 3/8 in, FIPT, Brass

Our Price: $6.99

Anderson Metals Pipe Coupling, Nominal Size: 1/4 in, FIPT Connection, Brass Anderson Metals Pipe Elbow, Nominal Size: 3/8 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Pipe Coupling, Nominal Size: 3/8 in, FIPT Connection, Brass

Anderson Metals 738107-02 Pipe Elbow, 1/8 in, FIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738107-04 Pipe Elbow, 1/4 in, FIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738100-02 Pipe Elbow, 1/8 in, FIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Our Price: $6.99

Anderson Metals Pipe Elbow, Nominal Size: 1/8 in, FIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Pipe Elbow, Nominal Size: 1/4 in, FIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Pipe Elbow, Nominal Size: 1/8 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes

Anderson Metals 738103-02 Pipe Coupling, 1/8 in, FIPT, Brass

Simmons 1307 Pressure Gauge, 1/8 in Connection, MPT, 2 in Dial, Steel Gauge Case, 0 to 100 lb, Center Back Connection

Anderson Metals 738110-1204 Reducing Pipe Bushing, 3/4 x 1/4 in, Male x Female, 200 psi Pressure

Our Price: $6.99

Our Price: $7.59

Anderson Metals Pipe Coupling, Nominal Size: 1/8 in, FIPT Connection, Brass Lead-free, steel case, brass mount. 1/8 in CBM connection. One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Simmons 1243 Air Valve, 1/8 in Connection, Steel Body

Anderson Metals 738110-1208 Reducing Pipe Bushing, 3/4 x 1/2 in, Male x Female, 200 psi Pressure

Anderson Metals 738107-08 Pipe Elbow, 1/2 in, FIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Our Price: $7.59

Our Price: $7.99

For all charging applications. For use with conventional tanks. One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Metals Pipe Elbow, Nominal Size: 1/2 in, FIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes

Anderson Metals 738103-08 Pipe Coupling, 1/2 in, FIPT, Brass

PUMP CUP LEATHER 1-11/16X5/8

Simmons 31/2OD Pump Valve, Leather

Our Price: $8.69

Our Price: $8.99

Anderson Metals Pipe Coupling, Nominal Size: 1/2 in, FIPT Connection, Brass "Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3"" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2"" Cylinder." Waterproof impregnated lower valve for regular service.

Anderson Metals 756116-06 Street Pipe Elbow, 3/8 in, FIP x MIP, 90 deg Angle, Brass, Rough, 1000 psi Pressure

Simmons 1244 Air Valve, 1/4 in Connection, Brass Body

Anderson Metals 738105-0604 Reducing Pipe Elbow, 3/8 x 1/4 in, FIP, 90 deg Angle, Brass, 200 psi Pressure

Our Price: $8.99

One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. For all charging applications. For use with conventional tanks. Anderson Metals Reducing Pipe Elbow, Nominal Size: 3/8 x 1/4 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Anderson Metals 738105-0602 Reducing Pipe Elbow, 3/8 x 1/8 in, FIP, 90 deg Angle, Brass, 200 psi Pressure

Anderson Metals 738119-0806 Reducing Pipe Coupling, 1/2 x 3/8 in, FIPT, Brass, 200 psi Pressure

Anderson Metals 738116-04 Street Pipe Elbow, 1/4 in, FIP x MIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Our Price: $8.99

Our Price: $9.99

Anderson Metals Reducing Pipe Elbow, Nominal Size: 3/8 x 1/8 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Red Anderson Metals Reducing Pipe Coupling, Nominal Size: 1/2 x 3/8 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Simmons 4130738 Pump Cup, Leather, Tan

Anderson Metals 738116-02 Street Pipe Elbow, 1/8 in, FIP x MIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738110-1608 Reducing Pipe Bushing, 1 x 1/2 in, Male x Female, 200 psi Pressure

Our Price: $9.99

Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder. One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Anderson Metals 738105-0806 Reducing Pipe Elbow, 1/2 x 3/8 in, FIP, 90 deg Angle, Brass, 200 psi Pressure

Anderson Metals 738103-12 Pipe Coupling, 3/4 in, FIP

Anderson Metals 738110-1612 Reducing Pipe Bushing, 1 x 3/4 in, Male x Female, 200 psi Pressure

Our Price: $9.99

Our Price: $10.99

Our Price: $11.99

Anderson Metals Reducing Pipe Elbow, Nominal Size: 1/2 x 3/8 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Red Anderson Metals Pipe Coupling, Nominal Size: 3/4 in, FIP Connection, Suitable for: Brass and Steel Pipe One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.

Anderson Metals 738105-1208 Reducing Pipe Elbow, 3/4 x 1/2 in, FIP, 90 deg Angle, Brass, 200 psi Pressure

Anderson Metals 738107-12 Pipe Elbow, 3/4 in, FIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738124-08 Street Pipe Elbow, 1/2 in, FIP x MIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Our Price: $11.99

Anderson Metals Reducing Pipe Elbow, Nominal Size: 3/4 x 1/2 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Red Anderson Metals Pipe Elbow, Nominal Size: 3/4 in, FIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Street Pipe Elbow, Nominal Size: 1/2 in, FIP x MIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass Pipe

Anderson Metals 738100-08 Pipe Elbow, 1/2 in, FIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738151-08 Floor Pipe Flange, 1/2 in, 4-Bolt Hole, Red Brass

Simmons 4130852 Pump Cup, Leather, Tan

Our Price: $11.99

Our Price: $12.99

Anderson Metals Pipe Elbow, Nominal Size: 1/2 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Floor Pipe Flange, Nominal Size: 1/2 in, Face Type: Flat, Number of Bolt Holes: 4, Red Brass Plastic and wax impregnated oak-tan leather cups for regular service. #3x2, use with #2 pitcher pump for 3 in cylinder. #31/2x21/4, use with #3 pitcher pump for 31/2 in cylinder.

Anderson Metals 738116-08 Street Pipe Elbow, 1/2 in, FIP x MIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738104-04 Pipe Union, 1/4 in, FIPT, Red Brass, 200 psi Pressure

Anderson Metals 738104-02 Pipe Union, 1/8 in, FIPT, Red Brass, 200 psi Pressure

Our Price: $12.99

One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard taper pipe threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Metals Pipe Union, Nominal Size: 1/4 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Red Brass Anderson Metals Pipe Union, Nominal Size: 1/8 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Red Brass

Anderson Metals 738119-1206 Reducing Pipe Coupling, 3/4 x 3/8 in, FIPT, Brass, 200 psi Pressure

Anderson Metals 738119-1208 Reducing Pipe Coupling, 3/4 x 1/2 in, FIPT, Brass, 200 psi Pressure

Simmons 1350 Torque Arrestor, Rubber, For: 1 or 1-1/4 in Drop Pipe and 4 to 8 in Well Casing

Our Price: $12.99

Our Price: $13.99

Anderson Metals Reducing Pipe Coupling, Nominal Size: 3/4 x 3/8 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass Anderson Metals Reducing Pipe Coupling, Nominal Size: 3/4 x 1/2 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass Fits 1 in or 1-1/4 in drop pipe, 4 in to 8 in well casing. Supplied with two stainless steel clamps.

Anderson Metals 738100-12 Pipe Elbow, 3/4 in, FIP, 90 deg Angle, Brass, Rough, 200 psi Pressure

Anderson Metals 738104-08 Pipe Union, 1/2 in, FIPT, Red Brass, 200 psi Pressure

Anderson Metals 738124-12 Street Pipe Elbow, 3/4 in, FIP x MIP, 45 deg Angle, Brass, Rough, 200 psi Pressure

Our Price: $13.99

Anderson Metals Pipe Elbow, Nominal Size: 3/4 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes Anderson Metals Pipe Union, Nominal Size: 1/2 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Red Brass Anderson Metals Street Pipe Elbow, Nominal Size: 3/4 in, FIP x MIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass Pipe


	1 2 3

The Hardware Store of Sparta

Products

Nav Menu 2

Nav Menu 3

Company Information

My Account

Customer Service