FOUNDATION VENTS

Products

Nav Menu 2

Nav Menu 3

Home > HARDWARE > CONSTRUCTION HARDWARE > VENTILATION PRODUCTS > FOUNDATION VENTS

Sort By:

Toolpro 5010 Eye Lag Screw, Carbon Steel, Zinc

Toolpro TP05044 Ceiling Grid Clamp, Plastic

Toolpro TP05032 Eye Lag Driver

Our Price: $4.99

Our Price: $10.99

Our Price: $11.99

Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment. Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line firmly in place without damaging the grid finish. This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver.

Witten Vent 510BL Foundation Vent, 15-1/4 in W, Polypropylene, Black Oxide

Witten Vent 510WH Foundation Vent, 15-1/4 in W, Polypropylene, White

Witten Vent 510BR Foundation Vent, 15-1/4 in W, Polypropylene, Brown

Our Price: $11.99

Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening. Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening. Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening.

Toolpro TP05110 Edge Cutter, Steel

Witten Vent 319BL Foundation Vent, Mesh Grill, Aluminum, Black

Witten Vent 500BL Foundation Vent, Black Oxide

Our Price: $14.99

The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on the first day by eliminating wasted tiles due to bad cuts. Blade changes and cutting depth are easily adjusted by hand with no additional tools required. For King and Queen size brick. Fits 9-1/4 in x 16 in vent openings. 1-3/4 in frame depth and 8 in x 8 in sized mesh. Mesh is made of aluminum perma kote epoxy charcoal. Frame is made of high-density polypropylene resins. 9-1/4 in x 16 in. Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, Black Oxide

Witten Vent 500BR Foundation Vent, Brown

Witten Vent 500WH Foundation Vent, White

Witten Vent 500GR Foundation Vent, Gray

Our Price: $16.99

Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, Brown Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, White Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, Gray

Toolpro 05015 Eye Lag Screw, 3 in L, Carbon Steel, Zinc, 100

Master Flow BVSII Foundation Vent, 15-3/8 in W, 8 in H, 73 sq-in Net Free Ventilating Area, Aluminum

Witten Vent A-ELBLACK Automatic Foundation Vent, 62 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Black Oxide

Our Price: $18.99

Our Price: $25.99

Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is recommended for the strongest attachment. Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home. With 18 in lintel for new construction. Fits standard 8 in x 16 in vent openings. High-density thermo-plastic construction. Automatically opens at 70 deg F, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion-resistant metal parts. 62 sq-in net-free area. Heavy-duty aluminum mesh screen, front and back. 8 in x 16 in.

Witten Vent 306MWH Foundation Vent, 65 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, White

Witten Vent B-E BROWN MB Foundation Vent, 65 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Brown

Witten Vent B-EBLACK MB Automatic Foundation Vent, 65 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Black Oxide

Our Price: $27.99

Our Price: $29.99

Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in. Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in. Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in.

Witten Vent 306MGR Foundation Vent, 65 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Gray

Witten Vent 304LGR Automatic Foundation Vent, 62 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Gray

Witten Vent A-ELBROWN Automatic Foundation Vent, 62 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Brown

Our Price: $29.99

Our Price: $31.99

Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in. With 18 in lintel for new construction. Fits standard 8 in x 16 in vent openings. High-density thermo-plastic construction. Automatically opens at 70 deg F, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion-resistant metal parts. 62 sq-in net-free area. Heavy-duty aluminum mesh screen, front and back. 8 in x 16 in. With 18 in lintel for new construction. Fits standard 8 in x 16 in vent openings. High-density thermo-plastic construction. Automatically opens at 70 deg F, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion-resistant metal parts. 62 sq-in net-free area. Heavy-duty aluminum mesh screen, front and back. 8 in x 16 in.

Toolpro TP05060 Grid Punch

Toolpro 05122 Ceiling Wire, Galvanized Steel

Master Flow FVRABL Automatic Foundation Vent, 16 in W, 8 in H, 57 sq-in Net Free Ventilating Area, Polyethylene

Our Price: $32.99

This grid punch is the most reliable and economical tool for preparing non-standard lengths of ceiling grid for fastening with rivets. Hardened pin will easily pierce 18 ga steel with little effort, allowing one-hand operation while freeing the other hand to hold the material steady. The tool's thin profile and deep throat makes punching holes into awkward and hard to reach corners possible. For optimum results place the steel cup firmly against the back of the material to be punched and squeeze with consistent pressure, bringing the pin into the material. The rubber tip on the punch will protect painted or coated finishes from being marred. Hanger wire is used to suspend ceiling grid main tees from the overhead structure. Designed for residential applications. The continuous 300 ft roll lets you cut the lengths you want with no waste. Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.

Witten Vent 315CBR Foundation Vent, 62 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Brown

Witten Vent 315CBL Foundation Vent, 62 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Black Oxide

Witten Vent 315CGR Foundation Vent, 62 sq-in Net Free Ventilating Area, Mesh Grill, Thermoplastic, Gray

Our Price: $34.99

With 1 in W frame for new construction or to replace old foundation vents. Fits standard 8 in x 16 in concrete block opening. Operates automatically without electricity, opens at 70 deg F, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8 in heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion-resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 sq-in net-free area. 8 in x 16 in. With 1 in W frame for new construction or to replace old foundation vents. Fits standard 8 in x 16 in concrete block opening. Operates automatically without electricity, opens at 70 deg F, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8 in heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion-resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 sq-in net-free area. 8 in x 16 in. With 1 in W frame for new construction or to replace old foundation vents. Fits standard 8 in x 16 in concrete block opening. Operates automatically without electricity, opens at 70 deg F, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8 in heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion-resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 sq-in net-free area. 8 in x 16 in.

Witten Vent 201CA Foundation Vent, Aluminum

Master Flow PFV1 Powered Foundation Vent, 16 in W, 8 in H, 57 sq-in Net Free Ventilating Area, Polyethylene, Black

SLIDE FOUNDATION VENT BLK PLS - Case of 12

Our Price: $34.99

Our Price: $129.99

Our Price: $131.88

Witten Vent Foundation Vent, Aluminum Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home. With 18 in L x 1 3/4 in W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 sq-in net-free area. 1/8 in aluminum screen. 8 in x 16 in.

CROSS TEE 15/16INX2FT WHITE - Case of 60

FNDTN VENT PUSH/PULL BLACK PLS - Case of 12

SLIDE FOUNDATION VENT BRW PLS - Case of 12

Our Price: $143.40

Our Price: $143.88

Our Price: $167.88

DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance. With 18 in L x 1-3/4 in W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 72 sq-in net-free area. 1/8 in aluminum screen. 8 in x 16 in. With 18 in L x 1 3/4 in W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 sq-in net-free area. 1/8 in aluminum screen. 8 in x 16 in.

SLIDE FOUNDATION VENT GRAY PLS - Case of 12

CROSS TEE 15/16INX4FT WHITE - Case of 60

MAIN RUNNER 1-1/2INX12FT WHITE - Case of 20

Our Price: $167.88

Our Price: $257.40

Our Price: $259.80

With 18 in L x 1 3/4 in W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 sq-in net-free area. 1/8 in aluminum screen. 8 in x 16 in. DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance. DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance.

FNDTN VNTLR/DAMPER 16X8IN - Case of 12

WALL MOULDING 7/8INX12FT WHITE - Case of 40

FNDTN VENT/LINTEL/DAMP 16X8IN - Case of 12

Our Price: $263.88

Our Price: $279.60

Our Price: $299.88

Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home. DONN? SDX?/SDXL? Acoustical suspension system has its own worth dictated in its economic and versatile approach. It has gained excellence over others on the industry for its simple installation, pocket friendly rates and ability to resist corrosion for quality performance. Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.

FOUNDATION VENT 16X8IN W/SHTER - Case of 12

Our Price: $335.88

Gaf 500 Grate Foundation Vent with Shutter

Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.


	1

The Hardware Store of Sparta

Products

Nav Menu 2

Nav Menu 3

Company Information

My Account

Customer Service