JOIST HANGERS

Products

Nav Menu 2

Nav Menu 3

Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > JOIST HANGERS

Sort By:

1 2

JOIST HANGER LIGHT ZMAX 2X4IN - Case of 12

JOIST HANGER HEAVY ZMAX 4X6IN - Case of 2

ProSource CL8181 Vinyl Self-Adhesive Floor Tile, 36 in L Tile, 6 in W Tile, Square Edge, Oak Plank

Our Price: $47.88

Our Price: $59.98

Our Price: $72.99

APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw. APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick.

JOIST HANGER ZMAX 18GA 2X6IN - Case of 25

ProSource CL3681 Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Beige Inlay

ProSource CL1201 Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Marble White

Our Price: $74.75

Our Price: $74.99

The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick.

ProSource CL7120 Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Wood Cross Weave

ProSource CL1030 Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Beige Slate

ProSource CL1170 Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Marble Dark Gray

Our Price: $74.99

The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel Stick.

ProSource CL1148 Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Marble Light Gray

ProSource CL2071 Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Diamond Stone

ProSource CL1108 Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Marble Green

Our Price: $74.99

The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation , just Peel N Stick. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick. The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation Just Peel N Stick.

ProSource CL2002 Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Blue/Gold

ProSource CL1992 Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Marble Rustic

ProSource CL1109 Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Rustic Stone

Our Price: $74.99

ProSource CL3267 Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Slate Inlay

ProSource ELE-1518-3L Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Wood Geometric

ProSource ELE-1305-3L Vinyl Self-Adhesive Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Black/White

Our Price: $74.99

Our Price: $79.99

ProSource ELE-1811-1-3L Vinyl Floor Tile, 12 in L Tile, 12 in W Tile, Square Edge, Dark Wood Geometric

HANGER JOIST GALV 18GA 2 X 6IN - Case of 25

JOIST HANGER LIGHT ZMAX 2X6IN - Case of 24

Our Price: $79.99

Our Price: $94.75

Our Price: $95.76

The ProSource Self-Adhesive Floor Tile can be used in any room in your home including the kitchen, dining room, bedrooms, bathrooms, foyers and basements. There will be no messy glue or adhesives to deal with. You can just peel and stick the tiles to a flat & dry surface and show off your beautiful new room to all your friends and neighbors. Easy Do-it-Yourself Installation, just Peel N Stick. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw.

JOIST HANGER GALV 18GA 2 X 4IN - Case of 100

JOIST HANGER ZMAX 18GA 2X10IN - Case of 25

JOIST HANGER GALV 18GA 2 X 8IN - Case of 25

Our Price: $99.00

Our Price: $114.75

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

JOIST HANGER GALV 18GA 2X10IN - Case of 50

HANGER JOIST GALV 18GA 2X10IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 6IN - Case of 25

Our Price: $119.50

Our Price: $119.75

Our Price: $124.75

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

JOIST HANGER ZMAX 18GA 2 X 4IN - Case of 100

LEFT-SKEWED U-HANGER ZMAX 2X6 - Case of 10

RIGHT-SKEWED U-HANGER ZMAX 2X6 - Case of 10

Our Price: $139.00

Our Price: $139.90

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation. The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.

JOIST HANGER ZMAX 18GA 2X10IN - Case of 50

JOIST HANGER GALV 18GA 2 X 8IN - Case of 50

JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 50

Our Price: $149.50

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

I-JOIST HANGER 2-5/16X11-7/8IN - Case of 25

PST-FRAME HANGER GALV 20GA 2X6 - Case of 25

Tie Tension Deck Zmax 14ga - Case of 40

Our Price: $149.75

Our Price: $151.60

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The PFDB is a top-flange saddle hanger designed for post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFDB features a folded seat that raises the 2X joist slightly above the seat radius to enable a tighter connection to the back of the hanger. The solid, one-piece top-flange allows for accurate and fast installation. DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications.

I-JOIST HANGER 1-3/4X11-7/8IN - Case of 25

I-JOIST HANGER 2-1/2 X 9-1/2IN - Case of 25

JOIST HANGER GALV 18GA 2 X 6IN - Case of 100

Our Price: $162.25

Our Price: $169.00

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

I-JOIST HANGER GALV 2X11-7/8IN - Case of 25

I-JOIST HANGER GALV 2X9-1/2IN - Case of 25

I-JOIST HANGER 2-1/2X11-7/8IN - Case of 25

Our Price: $174.75

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.

RAFTER HANGER ZMAX 18GA 2X6IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 15

TRUSS HANGER ADJ ZN GALV 2X9IN - Case of 50

Our Price: $174.75

Our Price: $179.85

Our Price: $189.50

The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The THA is a wood connector designed to support trusses and beams. This versatile U-shaped truss hanger features long, straight straps for applications where the height location of the truss needs to be adjustable. The field-adjustable THA can be used for top-flange or face-mount installation.

U-HANGER DBL SHR GALV 16GA 2X8 - Case of 25

I-JOIST HANGER 3-1/2X11-7/8IN - Case of 25

JOIST HANGER ZMAX 18GA 2X10IN - Case of 25

Our Price: $189.75

The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 25

I-JOIST HANGER GALV 2-1/2X14IN - Case of 25

TOP-FLG HANGER 2-1/2X11-7/8IN - Case of 25

Our Price: $189.75

Our Price: $199.75

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.

JOIST HANGER ZMAX 18GA 2 X 6IN - Case of 100

LEFT-SKEWED U-HANGER ZMAX 2X10 - Case of 10

RIGHT-SKEWD U-HANGER ZMAX 2X10 - Case of 10

Our Price: $219.00

Our Price: $219.90

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation. The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.

TOP-FLG HANGER 18GA 2-1/2X14IN - Case of 25

JOIST HANGER GALV 18GA 2X10IN - Case of 25

DECK TENSION TIE ZMAX 14GA - Case of 20

Our Price: $224.75

Our Price: $239.80

The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications.

TOP-FLG HANGER 3-1/2X11-7/8IN - Case of 25

JOIST HANGER ZMAX 18GA 2X10IN - Case of 25

TRUSS HANGER GALV 16GA 2 X 6IN - Case of 50

Our Price: $249.75

Our Price: $269.50

The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The HTU face-mount truss hanger has nail patterns designed specifically for shallow heel heights, so that full allowable loads apply to heel heights as low as 3-7/8 in. Minimum and maximum nailing options provide solutions for varying heel heights and end conditions. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2 in maximum to allow for greater construction tolerances.


	1 2

The Hardware Store of Sparta

Products

Nav Menu 2

Nav Menu 3

Company Information

My Account

Customer Service