Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > MISC CONSTR HARDWARE
Sort By:
1
Amerimax T0519 Exterior Hook, Vinyl, White Amerimax T1519 Contemporary Gutter Bracket, Brown FIXER FASCIA GUTTER VNYL WHITE
Our Price: $2.39
more info
Our Price: $2.39
more info
Our Price: $2.59
more info
HOOK EXTERIOR CONTEMP WHT 5IN HOOK EXTERIOR CONTEMP BRN 5IN FIXER FASCIA GUTTER VNYL WHITE
Amerimax Exterior Hook, Contemporary, Vinyl, White, 5 in L Amerimax Contemporary Gutter Bracket, Brown
CLIP DOWNSPOUT CONTEMP WHT 2IN CLIP DOWNSPOUT CONTEMP BRN 2IN Amerimax L0615 Wood Screw, 1-1/2 in L, Zinc
Our Price: $3.49
more info
Our Price: $3.49
more info
Our Price: $5.99
more info
CLIP DOWNSPOUT CONTEMP WHT 2IN CLIP DOWNSPOUT CONTEMP BRN 2IN SCREW GALV ZINC WHITE 1-1/2IN
Amerimax Wood Screw, 1-1/2 in L, Zinc
Squeek No More 1011345 Floor Squeak Repair Screw Amerimax 25043 Gutter Spike and Ferrule, Aluminum/Plastic, White Amerimax 2504319 Gutter Spike and Ferrule, Aluminum/Plastic, Brown
Our Price: $14.99
more info
Our Price: $14.99
more info
Our Price: $14.99
more info
Squeek No More 1011345 Screw Set Amerimax 25043 Gutter Spike and Ferrule Amerimax 2504319 Gutter Spike and Ferrule
Specially scored waxed screws. Scored head breaks off at the same place every time. Carded. Amerimax Gutter Spike and Ferrule, Aluminum/Plastic, White, Includes: (10) Spikes, (10) Ferrules Amerimax Gutter Spike and Ferrule, Aluminum/Plastic, Brown, Includes: (10) Spikes, (10) Ferrules
Acorn International GS-0007BRN Gutter Screw, #3 Drive, Square Drive, Brown, Dacrotized ACORN INTERNATIONAL GS-0007WHT Gutter Screw, #3 Drive, Square Drive, White, Dacrotized Squeek No More 1010543 Floor Squeak Repair Kit
Our Price: $16.99
more info
Our Price: $16.99
more info
Our Price: $22.99
more info
GutterTite 47803 Gutter Screw GutterTite 47802 Gutter Screw Squeek No More 1010543 Floor Squeak Repair Kit
Replaces old, loose or popped gutter spikes. No pre-drilling, 500 hrs dacrotized coat and low profile head. Note, each blister card includes ten screws, ten 5 in plastic ferrules and one #3 square drive bit. Replaces old, loose or popped gutter spikes. No pre-drilling, 500 hrs dacrotized coat and low profile head. Note, each blister card includes ten screws, ten 5 in plastic ferrules and one #3 square drive bit. The Squeek No More kit is designed to stop floor squeaks from above the floor by going safely through the carpet. The kit works on all carpets even berber. The Squeek No More kit has 50 screws that are scored one inch from the head and coated with a special wax that allows the screw to safely pass through the carpet. The tooling, a tripod fixture and driver bit, drives the screw safely through the carpet stopping the score on the screw slightly below the wood of the floor. Then with the tripod fixture you snap the head of the screw off. The screw thread then holds the floor to the joist without having any part of the screw sticking up that you could walk on. The kit also includes 2 joist finding tools. You use these to quickly and accurately find the joist from above the floor.
Simpson Strong-Tie WBSK Hardware Kit 2x4basics 90166 Bracket, Resin, Sand 2x4basics 90128 Shelf Link
Our Price: $34.99
more info
Our Price: $44.99
more info
Our Price: $67.99
more info
HARDWARE KIT WORKBENCH&SHELVNG Deckmate 90166 Deck Bench Bracket with Bench Bracket Hopkins 90128 Shelf Link 4 ft L x 2 ft W
The WBSK workbench and shelving hardware kit provides the connectors and connector fasteners to build a workbench or shelving unit. The kit features the Simpson Strong-Tie? Rigid Tie? RTC2Z corner connector that makes it easier to make strong and durable corner connections with 2 x 4 lumber using no angle cuts or bolts. Each kit contains enough RTC2Z connectors to construct one workbench. Two kits are necessary to build a four-shelf unit. With the WBSK kit, a professional quality project can be customized and completed in a couple of hours. You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7 in of deck space. Assembled unit stands 36 in H for deck railing, seat is 17 in H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. Lumber not included. You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8 ft. Includes ShelfLinks, hardware and instructions. Lumber not included.
Grabber Construction Deckmaster Series DMP125-10 Hidden Bracket, Powder-Coated Grabber Construction Deckmaster Series DMP175-10 Hidden Bracket, Powder-Coated Grabber Construction Deckmaster Series DMP100-10 Hidden Bracket, Powder-Coated
Our Price: $74.99
more info
Our Price: $74.99
more info
Our Price: $74.99
more info
Deckmaster DMP125-10 Hidden Deck Bracket Kit Deckmaster DMP175-10 Hidden Deck Bracket Kit Deckmaster DMP100-10 Hidden Deck Bracket Kit
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes. When using the Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes. When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
2x4basics 90110 Flip Top Bench Table, Wood, Sand COUPLER NUT ZINC PLATED 3/4IN - Case of 80 2x4basics 90158 Workbench Kit, Resin, Black
Our Price: $99.99
more info
Our Price: $107.80
more info
Our Price: $119.99
more info
Hopkins 90110 Comfortable Flip Top Bench Table COUPLER NUT ZINC PLATED 3/4IN Hopkins 90158 Workbench Kit
Make a comfortable, sturdy bench and a table up to 8 ft long. Just add 2x4 lumber pieces. Flips and locks from a bench to a table in seconds without using tools. Slide lock safely secures and locks in position. Made of maintenance-free structural resin. Use only one or slide two Bench Tables together for a full size picnic table. Good for small porches and decks. Assembled unit stands 34 in H in the bench position, 31 in H in the table position and both with 17-1/2 in H seat. Includes Bench Table legs, hardware and instructions. Lumber not included. The CNW is designed to connect threaded rods to one another and to anchor bolts. These coupler nuts are designed to exceed the specified minimum tensile capacity of the corresponding bolts and threaded rod. All CNW coupler nuts feature a positive stop to help ensure even threading into each end of the nut and a Witness? hole as a means to verify when rods are properly installed. Create a workbench, worktable or power tool stand. Add 2x4's plywood or particleboard to make a workbench, worktable or power tool stand in any length or width up to 8 ft L x 4 ft W. Simple assembly in less than an hour with only powered screwdriver and a saw. Only straight, 90 deg cuts required, no miter or angles. Made of structural resin. Kit includes: 4 legs, hardware and instructions. Lumber and shelf links not included.
Amerimax 29041BX25 Spike, 7 in L, Steel, Galvanized BRG PLATE SLTD ZMAX 5/8X9/64IN - Case of 50 Quikdrive Pmandrel75-Rc Replacement Mandrel - Case of 12
Our Price: $139.99
more info
Our Price: $174.50
more info
Our Price: $239.88
more info
SPIKE GUTTER GALV STL 25LB 7IN BRG PLATE SLTD ZMAX 5/8X9/64IN REPLACEMENT MANDREL 7-1/2IN
Amerimax Spike, 7 in L, Steel, Galvanized Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections. The LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2 x 4 and 2 x 6 walls. The slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate. Keep your Quik Drive auto-feed screw driving system in ideal condition with these Simpson Strong-Tie? replacement parts.
STUD SHOE GALV 16GA 1-9/16IN - Case of 50 Spike Gutter Al White 7in - Case of 250 Spike Gutter Al Brown 7in - Case of 250
Our Price: $399.50
more info
Our Price: $497.50
more info
Our Price: $497.50
more info
STUD SHOE GALV 16GA 1-9/16IN  SPIKE GUTTER AL WHITE 7IN     SPIKE GUTTER AL BROWN 7IN
The SS is designed to reinforce notched, vertical studs in construction. This stud shoe is used to strengthen a wall stud that has a large hole drilled through it, typically to accommodate a plumbing waste line. The SS installs over the outside diameter of the pipe and is used as part of a total member replacement in structural applications. Amerimax Gutter Spike, 7 in L, Aluminum, Brown
Grabber Construction Deckmaster Series DMP100-100 Hidden Bracket, Powder-Coated Grabber Construction Deckmaster Series DMP175-100 Hidden Bracket, Powder-Coated Grabber Construction Deckmaster Series DMP125-100 Hidden Bracket, Powder-Coated
Our Price: $529.99
more info
Our Price: $529.99
more info
Our Price: $529.99
more info
Deckmaster DMP100-100 Hidden Deck Bracket Kit Deckmaster DMP175-100 Hidden Deck Bracket Kit Deckmaster DMP125-100 Hidden Deck Bracket Kit
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes. When using the Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes. When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
   
 
1