MISC PAINT DEPT SELLING AIDS

Products

Nav Menu 2

Nav Menu 3

Home > PAINT & SUNDRIES > PAINT > COLORANTS & PAINT DEPT. AIDS > MISC PAINT DEPT SELLING AIDS

Sort By:

JOIST HANGER LIGHT ZMAX 2X4IN - Case of 12

JOIST HANGER HEAVY ZMAX 4X6IN - Case of 2

JOIST HANGER ZMAX 18GA 2X6IN - Case of 25

Our Price: $47.88

Our Price: $59.98

Our Price: $74.75

APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw. APHH heavy hangers connect 4X and 6X beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents? structural wood screw and hex head washer and to the header with the Strong-Drive? SDS heavy-duty connector screw. The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.

HANGER JOIST GALV 18GA 2 X 6IN - Case of 25

JOIST HANGER LIGHT ZMAX 2X6IN - Case of 24

JOIST HANGER GALV 18GA 2 X 4IN - Case of 100

Our Price: $94.75

Our Price: $95.76

Our Price: $99.00

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. APLH light hangers connect 2X joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents? connector screw. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

JOIST HANGER ZMAX 18GA 2X10IN - Case of 25

JOIST HANGER GALV 18GA 2 X 8IN - Case of 25

JOIST HANGER GALV 18GA 2X10IN - Case of 50

Our Price: $114.75

Our Price: $119.50

The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

HANGER JOIST GALV 18GA 2X10IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 6IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 4IN - Case of 100

Our Price: $119.75

Our Price: $124.75

Our Price: $139.00

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

LEFT-SKEWED U-HANGER ZMAX 2X6 - Case of 10

RIGHT-SKEWED U-HANGER ZMAX 2X6 - Case of 10

JOIST HANGER ZMAX 18GA 2X10IN - Case of 50

Our Price: $139.90

Our Price: $149.50

The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation. The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

JOIST HANGER GALV 18GA 2 X 8IN - Case of 50

JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 50

U-HANGER DBL SHR GALV 16GA 2X8 - Case of 25

Our Price: $149.50

Our Price: $149.75

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

I-JOIST HANGER 2-5/16X11-7/8IN - Case of 25

PST-FRAME HANGER GALV 20GA 2X6 - Case of 25

I-JOIST HANGER 1-3/4X11-7/8IN - Case of 25

Our Price: $149.75

Our Price: $162.25

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The PFDB is a top-flange saddle hanger designed for post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFDB features a folded seat that raises the 2X joist slightly above the seat radius to enable a tighter connection to the back of the hanger. The solid, one-piece top-flange allows for accurate and fast installation. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.

I-JOIST HANGER 2-1/2 X 9-1/2IN - Case of 25

RAFTER HANGER ZMAX 18GA 2X6IN - Case of 25

JOIST HANGER GALV 18GA 2 X 6IN - Case of 100

Our Price: $162.25

Our Price: $169.00

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

I-JOIST HANGER GALV 2X11-7/8IN - Case of 25

I-JOIST HANGER GALV 2X9-1/2IN - Case of 25

I-JOIST HANGER 2-1/2X11-7/8IN - Case of 25

Our Price: $174.75

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation.

I-JOIST HANGER 3-1/2X11-7/8IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 15

TRUSS HANGER ADJ ZN GALV 2X9IN - Case of 50

Our Price: $174.75

Our Price: $179.85

Our Price: $189.50

The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The THA is a wood connector designed to support trusses and beams. This versatile U-shaped truss hanger features long, straight straps for applications where the height location of the truss needs to be adjustable. The field-adjustable THA can be used for top-flange or face-mount installation.

JOIST HANGER ZMAX 18GA 2X10IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 8IN - Case of 25

TOP-FLG HANGER 2-1/2X11-7/8IN - Case of 25

Our Price: $189.75

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost.

TOP-FLG HANGER 18GA 2-1/2X14IN - Case of 25

I-JOIST HANGER GALV 2-1/2X14IN - Case of 25

JOIST HANGER ZMAX 18GA 2 X 6IN - Case of 100

Our Price: $199.75

Our Price: $219.00

The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost. The IUS is a hybrid hanger that incorporates the advantages of the face-mount and top-mount hanger. The Strong-Grip? seat feature allows the I-joist to snap securely into place without the need for joist nails, resulting in a low installed cost. The IUS hanger also features easy-to-reach face nails and self-jigging locator tabs for easier installation. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

LEFT-SKEWED U-HANGER ZMAX 2X10 - Case of 10

TOP-FLG HANGER 3-1/2X11-7/8IN - Case of 25

JOIST HANGER GALV 18GA 2X10IN - Case of 25

Our Price: $219.90

Our Price: $224.75

The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation. The innovative ITS is designed to support 90 deg connections of I-joists to headers. This top-flange hanger features the Strong-Grip? seat and Funnel Flange? design allowing standard joist installation without the use of joist nails, resulting in the lowest installed cost. The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

RIGHT-SKEWD U-HANGER ZMAX 2X10 - Case of 10

U-HANGER DBL SHR GALV 14G 4X12 - Case of 25

TRUSS HANGER GALV 16GA 2 X 6IN - Case of 50

Our Price: $229.90

Our Price: $249.75

Our Price: $269.50

The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation. The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. The HTU face-mount truss hanger has nail patterns designed specifically for shallow heel heights, so that full allowable loads apply to heel heights as low as 3-7/8 in. Minimum and maximum nailing options provide solutions for varying heel heights and end conditions. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2 in maximum to allow for greater construction tolerances.

U-HANGER DBL SHR GALV 16GA 2X6 - Case of 25

RAFTER HANGER ZMAX 18GA 2X10IN - Case of 25

RAFTER HANGER ZMAX 18GA 2X8IN - Case of 25

Our Price: $269.50

Our Price: $274.75

The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners. The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.

JOIST HANGER ZMAX 18GA 2X10IN - Case of 25

U-HANGER DBL SHR GALV 14G 4X10 - Case of 25

JOIST HANGER RGH GALV 16GA 2X6 - Case of 50

Our Price: $274.75

Our Price: $324.75

Our Price: $349.50

The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. The U is designed for joist-to-header installation in wood-framed construction. This face-mount hanger is engineered for strength and provides easy installation. The U hanger is precision-formed and manufactured to the highest quality standards.

U-HANGER DBL SHEAR 14GA 4X10IN - Case of 25

U-HANGER 16GA 1-13/16X8-7/8IN - Case of 25

HEADER HANGER ZN GALV 16GA 6X - Case of 20

Our Price: $349.75

Our Price: $459.80

The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. For fast, accurate installation of door and window headers and other cross-members. HH header hangers can speed up the job, strengthen the frame and eliminate the need for trimmers.

JOIST HANGER GALV 14GA 4X10IN - Case of 25

U-HANGER DBL SHR 14GA 5.5X10IN - Case of 25

JOIST HANGER FM ZMAX 2 X 10IN - Case of 25

Our Price: $474.75

Our Price: $749.75

The HU is designed for structures requiring additional strength and safety factors. Some models of this heavy-duty, face-mount hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg. The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection. The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg.

GIRDER HANGER 5-1/2X8-15/16IN - Case of 12

Our Price: $779.88

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price.


	1

The Hardware Store of Sparta

Products

Nav Menu 2

Nav Menu 3

Company Information

My Account

Customer Service