SCREWS - PKG - STRUCTURE -COAT

Products

Nav Menu 2

Nav Menu 3

Home > FASTENERS > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED > SCREWS - PKG - STRUCTURE -COAT

Sort By:

1 2 3

BARON 7170 Twist Link Chain, #70, 82 ft L, Brass

BARON 7209 Twist Link Chain, #90, 82 ft L, 9 lb Working Load, Nickel

BARON 7252 Machine Twist Chain, #2/0, 70 ft L, 520 lb Working Load, Zinc

Our Price: $1.19

Our Price: $1.69

Our Price: $3.29

BARON Twist Link Chain, Trade Size: #70, Brass, 82 ft L BARON Twist Link Chain, Working Load Limit: 9 lb, Trade Size: #90, Inside Link Width: 0.213 in, Inside Link Length: 0.134 in, Nickel, Material Diameter: 0.059 in, 82 ft L BARON Machine Twist Chain, Working Load Limit: 520 lb, Trade Size: #2/0, Zinc, 70 ft L

Campbell 0322026 Twist Link Coil Chain, #2/0, 175 ft L, 520 lb Working Load, Steel, Zinc

Campbell 0722527 Twist Link Coil Chain, #2/0, 70 ft L, 520 lb Working Load, Steel, Zinc

Simpson Strong-Tie Outdoor Accents SD10112DBBR50 Connector Screw, #10 Thread, 1-1/2 in L, Serrated Thread, Hex Head

Our Price: $4.79

Our Price: $4.99

Our Price: $7.99

GENERAL utility use. Low carbon steel standard material. Do not use for overhead lifting. GENERAL utility use. Low carbon steel standard material. Do not use for overhead lifting. The Outdoor Accents? connector screw reduces installation time by driving easily without pre-drilling. Designed for installation with the Outdoor Accents? connectors, such as the APA21 90 deg angle, APLH light joist hangers and APGT gazebo ties, the screw's black finish accents any outdoor living project. The sharp-point of the screw enables fast starts.

Camo 0360170 Structural Screw, 1/4 in Thread, 3 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Simpson Strong-Tie Strong-Drive SDS SDS25112-R25 Connector Screw, 1-1/2 in L, Serrated Thread, Hex Head, Hex Drive

Simpson Strong-Tie Strong-Drive SDS SDS25212-R25 Connector Screw, 2-1/2 in L, Serrated Thread, Hex Head, Hex Drive

Our Price: $9.99

Our Price: $10.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required.

Camo 0366180 Structural Screw, 5/16 in Thread, 2-7/8 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated

Simpson Strong-Tie Strong-Drive SDS SDS25412-R10 Connector Screw, 4-1/2 in L, Serrated Thread, Hex Head, Hex Drive

Camo 0360200 Structural Screw, 1/4 in Thread, 4 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Our Price: $11.99

Our Price: $12.99

Simpson Strong-Tie Outdoor Accents SDWS SDWS22312DBBRC12 Structural Screw, 3-1/2 in L, Low-Profile Head, 6-Lobe Drive

Simpson Strong-Tie Strong-Drive SDS SDS25300-R25 Connector Screw, 3 in L, Serrated Thread, Hex Head, Hex Drive

Simpson Strong-Tie Strong-Drive SD SD8X1.25-R Screw, #8 Thread, 1-1/4 in L, Serrated Thread, Wafer Head, Steel

Our Price: $12.99

Our Price: $13.99

The Outdoor Accents? structural wood screw reduces installation time by driving easily without pre-drilling. When combined with the patented, load-rated Outdoor Accents? hex head washer, the solution delivers the decorative appearance of a bolt connection but with a much easier installation. The structural wood screw is now available in three sizes 2 in, 3-1/2 in and 5-1/2 in and can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project. The 3-1/2 in and 5-1/2 in screws are ideal for structural applications. They feature a bold thread design that enables excellent holding to attach ledgers and other secure connections. The 2 in screw is ideal for use with 2X lumber and for adding style to any DIY project. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. Interior wood screws provide fastening solutions that ensure a safer, stronger indoor living environment. The versatile wafer head screw is designed for general wood-to-wood fastening where its pull-through resistance is an advantage. This versatile screw features a sharp-point for easy installation and is ideal for everything from cabinetry to framing.

Camo 0366190 Structural Screw, 5/16 in Thread, 3-1/2 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated

Simpson Strong-Tie Strong-Drive SDWS SDWS16212Q-R50 SDWS Framing Screw, 2-1/2 in L, Serrated Thread, Low-Profile Head

Simpson Strong-Tie Strong-Drive SDWS SDWS22300DB-R12 Timber Screw, 3 in L, Washer Head, 6-Lobe Drive, Steel

Our Price: $14.99

Simpson Strong-Tie Strong-Drive SDWS SDWS22400DB-R12 Timber Screw, 4 in L, Washer Head, 6-Lobe Drive, Steel

Simpson Strong-Tie Strong-Drive SD SD9112R100 Connector Screw, #9 Thread, 1-1/2 in L, Serrated Thread, Hex Head

Camo 0364170 Structural Screw, 1/4 in Thread, 3 in L, Hex Head, Hex Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Our Price: $14.99

Our Price: $15.99

The Strong-Drive? SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The Strong-Drive? SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie? connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie? products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.

Simpson Strong-Tie Strong-Drive SDWS SDWS16312QR50 Framing Screw, 3-1/2 in L, Serrated Thread, Low-Profile Head, 50

Simpson Strong-Tie Strong-Drive SDWS SDWS16400QR50 Framing Screw, 4 in L, Serrated Thread, Low-Profile Head, 50

Camo 0364200 Structural Screw, 1/4 in Thread, 4 in L, Hex Head, Hex Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Our Price: $15.99

Our Price: $16.99

The SDWS Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in framing applications. The SDWS Framing screw is great to nails in holding power and pull-out resistance. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The screw has a SawTooth? point that makes for fast installations with reduced torque without predrilling and its specially designed head countersinks easily to provide a clean, flush finish. The T25 bit holds the 6-lobe recess tightly for more secure drive control. The SDWS Framing screw is designed and load-rated for replacing 16d, 10d and 8d nails in framing applications. The SDWS Framing screw is great to nails in holding power and pull-out resistance. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. The screw has a SawTooth? point that makes for fast installations with reduced torque without predrilling and its specially designed head countersinks easily to provide a clean, flush finish. The T25 bit holds the 6-lobe recess tightly for more secure drive control. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.

Camo 0366200 Structural Screw, 5/16 in Thread, 4 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Simpson Strong-Tie Strong-Drive SDWH SDWH19400DB-R12 Timber Screw, 4 in L, Coarse Thread, Large Hex Washer Head

Simpson Strong-Tie Strong-Drive SDWS SDWS22500DB-R12 Timber Screw, 5 in L, Washer Head, 6-Lobe Drive, Steel

Our Price: $16.99

Simpson Strong-Tie Strong-Drive SD SD10112R100 Connector Screw, #10 Thread, 1-1/2 in L, Serrated Thread, Hex Head

GRK Fasteners RSS 12151 Structural Screw, 1/4 in Thread, 1-1/2 in L, Washer Head, Star Drive, Steel, 50 PK

GRK Fasteners RSS 12133 Structural Screw, #10 Thread, 2-1/2 in L, Washer Head, Star Drive, Steel, 50 PK

Our Price: $16.99

Our Price: $17.99

The Strong-Drive? SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie? connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie? products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.

Camo 0364090 Structural Screw, 1/4 in Thread, 1-1/2 in L, Hex Head, Hex Drive, Sharp Point, PROTECH Ultra 4 Coated, 25

Camo 0366210 Structural Screw, 5/16 in Thread, 4-1/2 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated

Camo 0366220 Structural Screw, 5/16 in Thread, 5 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Our Price: $17.99

Our Price: $18.99

Camo 0360240 Structural Screw, 1/4 in Thread, 6 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Simpson Strong-Tie Strong-Drive SDWS SDWS22600DB-R12 Timber Screw, 6 in L, Washer Head, 6-Lobe Drive, Steel

Simpson Strong-Tie Strong-Drive SDWS SDWS22800DB-R12 Timber Screw, 8 in L, Washer Head, 6-Lobe Drive, Steel

Our Price: $18.99

Camo 0355150 Framing Screw, 0.16 in Thread, 2-1/2 in L, Flat Head, Star Drive, Slash Point, PROTECH Ultra 4 Coated, 50

Simpson Strong-Tie Strong-Drive SDS SDS25312-R25L Connector Screw, 3-1/2 in L, Serrated Thread, Hex Head, Hex Drive

GRK Fasteners RSS 12137 Structural Screw, #10 Thread, 3-1/8 in L, Washer Head, Star Drive, Steel, 50 PK

Our Price: $19.99

Our Price: $21.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.

Camo 0364240 Structural Screw, 1/4 in Thread, 6 in L, Hex Head, Hex Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Simpson Strong-Tie Strong-Drive SD SD9212R100-R Connector Screw, #9 Thread, 2-1/2 in L, Serrated Thread, Hex Head

GRK Fasteners RSS 14221 Structural Screw, 5/16 in Thread, 3-1/8 in L, Washer Head, Star Drive, Steel, 25 PK

Our Price: $21.99

Our Price: $22.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Strong-Drive? SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie? connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie? products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. GRK's RSS??? screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS??? screws that are 3-1/8 in and longer have CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS??? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS??? screw in pre-drilled hardware like hinges and connector plates.

SCREW RSS STARHD 50CT 1/4X2IN

Camo 0360260 Structural Screw, 1/4 in Thread, 8 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Camo 0355170 Framing Screw, 0.16 in Thread, 3 in L, Flat Head, Star Drive, Slash Point, PROTECH Ultra 4 Coated, 50

Our Price: $22.99

Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.

Camo 0368200 Structural Screw, 1/4 in Thread, 4 in L, Hex Head, Hex Drive, Sharp Point, Hot-Dipped Galvanized, 10

Simpson Strong-Tie Strong-Drive SD SD10212R100-R Screw Anchor, #10 Dia, 2-1/2 in L, Steel, Galvanized

Simpson Strong-Tie Strong-Drive SDS SDS25600-R10 Connector Screw, 6 in L, Serrated Thread, Hex Head, Hex Drive

Our Price: $22.99

Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more. The Strong-Drive? SD connector screw is specifically designed to replace nails in certain Simpson Strong-Tie? connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie? products. In certain applications screws are easier and more convenient to install than nails and the single-fastener load values achieved by the SD screw exceed those of typical 10d common or 16d common nails. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. The Simpson Strong-Tie? Strong-Drive? SDS heavy-duty connector screw is a 0.25 in Dia high-strength structural wood screw ideal for various connector installations as well as wood-to-wood and engineered-wood applications. It installs with no pre-drilling and has been extensively tested in various applications. The SDS is improved with an easy-driving Type-17 point and a corrosion-resistant double-barrier coating. The SDS Strong-Drive? 1/4 in wood screw line has expanded to include stainless steel SDS screws in 1-1/2 to 3-1/2 in lengths, suitable for fastening Simpson Strong-Tie? stainless steel products. Offering the same easy-driving, split-reducing installation of the standard SDS screw, these screws are made from Type 316 stainless steel. The stainless steel SDS screws are appropriate for higher-exposure environments where maximum corrosion resistance is required.

SCREW RSS MINI 5/16X4IN

Camo 0366240 Structural Screw, 5/16 in Thread, 6 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Camo 0360270 Structural Screw, 1/4 in Thread, 10 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10

Our Price: $24.99

Our Price: $27.99

Simpson Strong-Tie Strong-Drive SDWS SDWS22300DB-R50 Timber Screw, 3 in L, Serrated Thread, Washer Head, Steel

GRK Fasteners RSS 14231 Structural Screw, 5-1/8 in L, W-Cut Thread, Washer Head, Recessed Star Drive, Zip-Tip Point

Camo 0368240 Structural Screw, 1/4 in Thread, 6 in L, Hex Head, Hex Drive, Sharp Point, Hot-Dipped Galvanized, 10

Our Price: $27.99

Our Price: $29.99

The Strong-Drive? SDWS timber screw is designed to provide an easy to install, high-strength alternative to through-bolting and traditional lag screws. This screw is ideal for the contractor and do-it-yourselfer alike. It is code listed in IAPMO UES ER-192 and meets 2018 and 2021 IRC? and IBC? code requirements for most common wood framing applications. GRK's RSS? rugged structural screw is made of specially hardened steel to provide you with high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood), reducing the splitting effect due to smaller shanks. RSS? screws which are 3-1/8 in and longer have a six threaded CEE thread that enlarges the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the likelihood of splitting the wood. This is why the RSS? screw is an efficient lag screw alternative. Our round head with built-in shield (washer type head) has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to center the RSS? screw in pre-drilled hardware like hinges and connector plates. Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and more.